Process Dynamics and Control, EMEA Edition

Höfundar: Dale E. Seborg; Thomas F. Edgar; Duncan A. Mellichamp; Francis J. Doyle III (Útgáfa: 4)
Process Dynamics and Control, EMEA Edition

Kaup valmöguleikar

The new 4th edition of Seborg's Process Dynamics and Control provides full topical coverage for process control courses in the chemical engineering curriculum, emphasizing how process control and its related fields of process modeling and optimization are essential to the development of high-value products. A principal objective of this new edition is to describe modern techniques for control processes, with an emphasis on complex systems necessary to the development, design, and operation of modern processing plants.

Nánar um bókina

Útgefandi
Wiley Global Education UK
ISBN
9781119636908
Print ISBN
9781119587491
Format
ePub
Útgáfa
4
Höfundar
Dale E. Seborg; Thomas F. Edgar; Duncan A. Mellichamp; Francis J. Doyle III
Tungumál
English
Útgefið
01/2020
Prent takmörkun á líftíma
100
Prent takmörkun
10
Afritunar takmörkun
2

Kaflar

  • COVER
  • TITLE PAGE
  • About the Authors
  • Preface
  • Chapter 1: Introduction to Process Control
  • 1.1 REPRESENTATIVE PROCESS CONTROL PROBLEMS
  • 1.2 ILLUSTRATIVE EXAMPLE—A BLENDING PROCESS
  • 1.3 CLASSIFICATION OF PROCESS CONTROL STRATEGIES
  • 1.4 A MORE COMPLICATED EXAMPLE—A DISTILLATION COLUMN
  • 1.5 THE HIERARCHY OF PROCESS CONTROL ACTIVITIES
  • 1.6 AN OVERVIEW OF CONTROL SYSTEM DESIGN
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Chapter 2: Theoretical Models of Chemical Processes
  • 2.1 THE RATIONALE FOR DYNAMIC PROCESS MODELS
  • 2.2 GENERAL MODELING PRINCIPLES
  • 2.3 DEGREES OF FREEDOM ANALYSIS
  • 2.4 DYNAMIC MODELS OF REPRESENTATIVE PROCESSES
  • 2.5 PROCESS DYNAMICS AND MATHEMATICAL MODELS
  • SUMMARY
  • REFERENCES
  • Simulation Software: Web Sites
  • EXERCISES
  • NOTE
  • Chapter 3: Laplace Transforms
  • 3.1 LAPLACE TRANSFORMS OF REPRESENTATIVE FUNCTIONS
  • 3.2 SOLUTION OF DIFFERENTIAL EQUATIONS BY LAPLACE TRANSFORM TECHNIQUES
  • 3.3 PARTIAL FRACTION EXPANSION
  • 3.4 OTHER LAPLACE TRANSFORM PROPERTIES
  • 3.5 A TRANSIENT RESPONSE EXAMPLE
  • 3.6 SOFTWARE FOR SOLVING SYMBOLIC MATHEMATICAL PROBLEMS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 4: Transfer Function Models
  • 4.1 INTRODUCTION TO TRANSFER FUNCTION MODELS
  • 4.2 PROPERTIES OF TRANSFER FUNCTIONS
  • 4.3 LINEARIZATION OF NONLINEAR MODELS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Chapter 5: Dynamic Behavior of First-Order and Second-Order Processes
  • 5.1 STANDARD PROCESS INPUTS
  • 5.2 RESPONSE OF FIRST-ORDER PROCESSES
  • 5.3 RESPONSE OF INTEGRATING PROCESSES
  • 5.4 RESPONSE OF SECOND-ORDER PROCESSES
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 6: Dynamic Response Characteristics of More Complicated Processes
  • 6.1 POLES AND ZEROS AND THEIR EFFECT ON PROCESS RESPONSE
  • 6.2 PROCESSES WITH TIME DELAYS
  • 6.3 APPROXIMATION OF HIGHER-ORDER TRANSFER FUNCTIONS
  • 6.4 INTERACTING AND NONINTERACTING PROCESSES
  • 6.5 STATE-SPACE AND TRANSFER FUNCTION MATRIX MODELS
  • 6.6 MULTIPLE-INPUT, MULTIPLE-OUTPUT (MIMO) PROCESSES
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Chapter 7: Development of Empirical Models from Process Data
  • 7.1 MODEL DEVELOPMENT USING LINEAR OR NONLINEAR REGRESSION
  • 7.2 FITTING FIRST- AND SECOND-ORDER MODELS USING STEP TESTS
  • 7.3 NEURAL NETWORK MODELS
  • 7.4 DEVELOPMENT OF DISCRETE-TIME DYNAMIC MODELS
  • 7.5 IDENTIFYING DISCRETE-TIME MODELS FROM EXPERIMENTAL DATA
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Chapter 8: Feedback Controllers
  • 8.1 INTRODUCTION
  • 8.2 BASIC CONTROL MODES
  • 8.3 FEATURES OF PID CONTROLLERS
  • 8.4 DIGITAL VERSIONS OF PID CONTROLLERS
  • 8.5 TYPICAL RESPONSES OF FEEDBACK CONTROL SYSTEMS
  • 8.6 ON–OFF CONTROLLERS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTES
  • Chapter 9: Control System Instrumentation
  • 9.1 SENSORS, TRANSMITTERS, AND TRANSDUCERS
  • 9.2 FINAL CONTROL ELEMENTS
  • 9.3 ACCURACY IN INSTRUMENTATION
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Chapter 10: Process Safety and Process Control
  • 10.1 LAYERS OF PROTECTION
  • 10.2 ALARM MANAGEMENT
  • 10.3 ABNORMAL EVENT DETECTION
  • 10.4 RISK ASSESSMENT
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Chapter 11: Dynamic Behavior and Stability of Closed-Loop Control Systems
  • 11.1 BLOCK DIAGRAM REPRESENTATION
  • 11.2 CLOSED-LOOP TRANSFER FUNCTIONS
  • 11.3 CLOSED-LOOP RESPONSES OF SIMPLE CONTROL SYSTEMS
  • 11.4 STABILITY OF CLOSED-LOOP CONTROL SYSTEMS
  • 11.5 ROOT LOCUS DIAGRAMS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Chapter 12: PID Controller Design, Tuning, and Troubleshooting
  • 12.1 PERFORMANCE CRITERIA FOR CLOSED-LOOP SYSTEMS
  • 12.2 MODEL-BASED DESIGN METHODS
  • 12.3 CONTROLLER TUNING RELATIONS
  • 12.4 CONTROLLERS WITH TWO DEGREES OF FREEDOM
  • 12.5 ON-LINE CONTROLLER TUNING
  • 12.6 GUIDELINES FOR COMMON CONTROL LOOPS
  • 12.7 TROUBLESHOOTING CONTROL LOOPS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTES
  • Chapter 13: Control Strategies at the Process Unit Level
  • 13.1 DEGREES OF FREEDOM ANALYSIS FOR PROCESS CONTROL
  • 13.2 SELECTION OF CONTROLLED, MANIPULATED, AND MEASURED VARIABLES
  • 13.3 APPLICATIONS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 14: Frequency Response Analysis and Control System Design
  • 14.1 SINUSOIDAL FORCING OF A FIRST-ORDER PROCESS
  • 14.2 SINUSOIDAL FORCING OF AN nTH-ORDER PROCESS
  • 14.3 BODE DIAGRAMS
  • 14.4 FREQUENCY RESPONSE CHARACTERISTICS OF FEEDBACK CONTROLLERS
  • 14.5 NYQUIST DIAGRAMS
  • 14.6 BODE STABILITY CRITERION
  • 14.7 GAIN AND PHASE MARGINS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 15: Feedforward and Ratio Control
  • 15.1 INTRODUCTION TO FEEDFORWARD CONTROL
  • 15.2 RATIO CONTROL
  • 15.3 FEEDFORWARD CONTROLLER DESIGN BASED ON STEADY-STATE MODELS
  • 15.4 FEEDFORWARD CONTROLLER DESIGN BASED ON DYNAMIC MODELS
  • 15.5 THE RELATIONSHIP BETWEEN THE STEADY-STATE AND DYNAMIC DESIGN METHODS
  • 15.6 CONFIGURATIONS FOR FEEDFORWARD–FEEDBACK CONTROL
  • 15.7 TUNING FEEDFORWARD CONTROLLERS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 16: Enhanced Single-Loop Control Strategies
  • 16.1 CASCADE CONTROL
  • 16.2 TIME-DELAY COMPENSATION
  • 16.3 INFERENTIAL CONTROL
  • 16.4 SELECTIVE CONTROL/OVERRIDE SYSTEMS
  • 16.5 NONLINEAR CONTROL SYSTEMS
  • 16.6 ADAPTIVE CONTROL SYSTEMS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 17: Digital Sampling, Filtering, and Control
  • 17.1 SAMPLING AND SIGNAL RECONSTRUCTION
  • 17.2 SIGNAL PROCESSING AND DATA FILTERING
  • 17.3 z-TRANSFORM ANALYSIS FOR DIGITAL CONTROL
  • 17.4 TUNING OF DIGITAL PID CONTROLLERS
  • 17.5 DIRECT SYNTHESIS FOR DESIGN OF DIGITAL CONTROLLERS
  • 17.6 MINIMUM VARIANCE CONTROL
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 18: Multiloop and Multivariable Control
  • 18.1 PROCESS INTERACTIONS AND CONTROL LOOP INTERACTIONS
  • 18.2 PAIRING OF CONTROLLED AND MANIPULATED VARIABLES
  • 18.3 SINGULAR VALUE ANALYSIS
  • 18.4 TUNING OF MULTILOOP PID CONTROL SYSTEMS
  • 18.5 DECOUPLING AND MULTIVARIABLE CONTROL STRATEGIES
  • 18.6 STRATEGIES FOR REDUCING CONTROL LOOP INTERACTIONS
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 19: Real-Time Optimization
  • 19.1 BASIC REQUIREMENTS IN REAL-TIME OPTIMIZATION
  • 19.2 THE FORMULATION AND SOLUTION OF RTO PROBLEMS
  • 19.3 UNCONSTRAINED AND CONSTRAINED OPTIMIZATION
  • 19.4 LINEAR PROGRAMMING
  • 19.5 QUADRATIC AND NONLINEAR PROGRAMMING
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 20: Model Predictive Control
  • 20.1 OVERVIEW OF MODEL PREDICTIVE CONTROL
  • 20.2 PREDICTIONS FOR SISO MODELS
  • 20.3 PREDICTIONS FOR MIMO MODELS
  • 20.4 MODEL PREDICTIVE CONTROL CALCULATIONS
  • 20.5 SET-POINT CALCULATIONS
  • 20.6 SELECTION OF DESIGN AND TUNING PARAMETERS
  • 20.7 IMPLEMENTATION OF MPC
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Chapter 21: Process Monitoring
  • 21.1 TRADITIONAL MONITORING TECHNIQUES
  • 21.2 QUALITY CONTROL CHARTS
  • 21.3 EXTENSIONS OF STATISTICAL PROCESS CONTROL
  • 21.4 MULTIVARIATE STATISTICAL TECHNIQUES
  • 21.5 CONTROL PERFORMANCE MONITORING
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTES
  • Chapter 22: Batch Process Control
  • 22.1 BATCH CONTROL SYSTEMS
  • 22.2 SEQUENTIAL AND LOGIC CONTROL
  • 22.3 CONTROL DURING THE BATCH
  • 22.4 RUN-TO-RUN CONTROL
  • 22.5 BATCH PRODUCTION MANAGEMENT
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • NOTES
  • Chapter 23: Biosystems Control Design
  • 23.1 PROCESS MODELING AND CONTROL IN PHARMACEUTICAL OPERATIONS
  • 23.2 PROCESS MODELING AND CONTROL FOR DRUG DELIVERY
  • SUMMARY
  • REFERENCES
  • EXERCISES
  • Chapter 24: Dynamics and Control of Biological Systems
  • 24.1 SYSTEMS BIOLOGY
  • 24.2 GENE REGULATORY CONTROL
  • 24.3 SIGNAL TRANSDUCTION NETWORKS
  • SUMMARY
  • GLOSSARY
  • REFERENCES
  • EXERCISES
  • NOTE
  • Appendix A: Digital Process Control Systems: Hardware and Software
  • A.1 DISTRIBUTED DIGITAL CONTROL SYSTEMS
  • A.2 ANALOG AND DIGITAL SIGNALS AND DATA TRANSFER
  • A.3 MICROPROCESSORS AND DIGITAL HARDWARE IN PROCESS CONTROL
  • A.4 SOFTWARE ORGANIZATION
  • REFERENCES
  • NOTES
  • Appendix B: Review of Thermodynamic Concepts for Conservation Equations
  • B.1 SINGLE-COMPONENT SYSTEMS
  • B.2 MULTICOMPONENT SYSTEMS
  • REFERENCE
  • Appendix C: Control Simulation Software
  • C.1 MATLAB OPERATIONS AND EQUATION SOLVING
  • C.2 COMPUTER SIMULATION WITH SIMULINK
  • C.3 COMPUTER SIMULATION WITH LabVIEW
  • REFERENCES
  • NOTE
  • Appendix D: Instrumentation Symbols
  • REFERENCES
  • Appendix E: Process Control Modules
  • E.1 INTRODUCTION
  • E.2 MODULE ORGANIZATION
  • E.3 HARDWARE AND SOFTWARE REQUIREMENTS
  • E.4 INSTALLATION
  • E.5 RUNNING THE SOFTWARE
  • REFERENCES
  • Appendix F: Review of Basic Concepts From Probability and Statistics
  • F.1 PROBABILITY CONCEPTS
  • F.2 MEANS AND VARIANCES
  • F.3 STANDARD NORMAL DISTRIBUTION
  • F.4 ERROR ANALYSIS
  • REFERENCES
  • Index
  • End User License Agreement